Technical Peformance
Profile technology
- High insulation multi-chamber system in symmetric design, quality assured thermal insulator connection, with 30° bevelled glazing rebates
- Patented corner and butt joint connection technology for high rigidity of frames and sashes
- Infill thickness up to 59 mm
Thermal insulation
Uf values: up to 1.5 W/(m²K)
\Uw values: up to 0.84 W/(m²K) with triple glazing
Gasket concept
Central gasket in three variants:
Circumferential installation without corner pieces
With formed corners, no adhesive required
Corner vulcanised frames
Hardware
- Heavy duty system hardware with:
- Visible hinges, powder coating or anodisation in all colours
- Concealed hinges with integrated end position damping, opening angle max. 105°
- Sash weight:
- Visible hinges: up to 100 kg
- Concealed hinges: up to 100 kg
- Sash sizes (w x h): 1300 mm x 1700 mm
- Optionally with opening limiter in various executions
WICLINE 65 evo/75 evo Casement
Bevelled profile contours and overlapping sashes are characteristic of the aluminium window series WICLINE evo in a classic design. This design underlines a style which is often requested for residential architecture. Ideal for new buildings and for renovations alike.
Additional designs non-insulated:
- Flush sash in classic design
- Overlapping sash and frame in classic design
- Fixed glazing
- Double casement window
- Crossbar profiles and glazing bars
Integration frame for stick façades - Fanlight
- Burglar resistance (see system tests)
Compatible with the door series WICSTYLE 65 evo and WICSTYLE 75 evo in Classic Design
Technical data
System test results / CE product pass in accordance with EN 14351-1:2006+A2:2016
Air permeability
Class 4
Water tightness
E900
Resistance to wind load
Class C5 / B5
Operating forces
Class 1
Repeated opening / closing
Class 3 (20 000 cycles)
Burglar resistance
RC1N, RC2N, RC2, RC3
Quality assurance
Certified according to ISO 9001:2008
Environmental management
Certified according to ISO 14001
Acoustic Performance
Rw (C; Ctr) = 47 (–1; –4) dB
Load bearing capacity of safety devices
Fulfilled
Mechanical strength
Class 4
Bullet resistance
FB4 S, FB4 NS (depending on the profile combination)
Corrosion resistance of fittings
Class 5